Omega Follow Ref. ST 145.014 An extremely rare, fine and historically important stainless steel prototype astronaut's wristwatch with white dial, delivered to NASA Circa 1970 45.5mm Length, 42mm Width Case, dial, movement and buckle signed
Condition Report Sign up or Log in Manufacturer : Omega Year : Circa 1970 Reference No : ST 145.014 Movement No : 0'001'697 Model Name : Speedmaster Alaska I Material : Stainless steel Calibre : Manual, cal. 861, 17 jewels Bracelet/Strap : Leather Clasp/Buckle : Stainless steel Omega pin buckle Dimensions : 45.5mm Length, 42mm Width Signed : Case, dial, movement and buckle signed Accessories : Accompanied by Omega Extract from the Archives confirming production of the present watch in Circa 1970 as part of the third and last batch of the "Alaska I" project series of prototypes, and its subsequent delivery to the Apollo Program Office at NASA (Houston). Catalogue Essay In 1968, NASA engineer James Ragan approached Omega with the idea of creating a dedicated “Lunar Surface Chronograph”. Mr. Ragan was the same engineer who oversaw the 1965 tests which selected the Speedmaster as NASA’s official timepiece, and he was therefore very well acquainted with the model. Still, he was worried that the longer EVAs (“Extra Vehicular Activities”) on the lunar surface might prove excessive even for the qualified Speedmaster. This was the beginning of the “ALASKA” project, so named following the internal tradition of code-naming watch developments with the names of cities, countries or states. Contrary to widespread urban legends, this name had indeed absolutely nothing with the low temperatures encountered in the State of Alaska. Many iterations of “ALASKA” projects came to be, but the present lot is a representative of the legendary “ALASKA I” project. Produced in 1969 and delivered to Mr. Ragan at NASA for testing, “ALASKA I” was a series of prototypes involving not only one of the first, if not the first, titanium-cased chronographs, but also a version of Omega ́s calibre 861 that featured numerous modifications to ensure better resistance to extreme temperature changes. Such a technologically advanced project accumulated extremely high costs, and the first iteration of the “ALASKA I” became unbearably expensive. Omega thus created a follow-up design in order to achieve the same results but while trying to keep the costs within reasonable levels. The case of this project was modeled after the then new Speedmaster “Mark II”, but this is where all similarities between the two models end: other than the case, literally nothing remained the same between this second series of “ALASKA I” prototypes and the Speedmaster “Mark II”. While the first series of “ALASKA I" features a black dial, a silvery-white dial was now chosen for its reflective capabilities. The chronograph sub-dial hands were maintained unaltered: the shape of these hands ensures legibility even while the watch sustains extreme vibrations, while any other regular hand under the same conditions would literarily blur out of sight. As with the very first version, the caliber 861 of this second “ALASKA I” version received many technical fine-tuning including the pioneering use of novel lubricants that ensured perfect operation even under extreme conditions in space. Another noteworthy detail is the crystal: during the 1965 tests, Mr. Ragan was very clear that he only accepted acrylic, plexi or hesalite crystals that would not shatter in many small pieces. In order to be able to provide better environmental sealing, Omega reverted to mineral crystal for all variants of the “ALASKA I” project, a fact at first regarded with adequate suspicion by Mr. Ragan himself. After several tests, however, the new crystal was proven more than adequate, with Mr. Ragan later recalling humorously that, try as he might, he could not get the crystals to break. With the approaching of Apollo 11 and the moon landing, the project was eventually cut short thus restricting production to few precious prototypes. This watch is an incredible chance for collectors of rare and highly important timepieces alike to acquire a true piece of history: one of the very few - possibly the only - surviving examples of “Mark
Omega Follow Ref. ST 145.014 An extremely rare, fine and historically important stainless steel prototype astronaut's wristwatch with white dial, delivered to NASA Circa 1970 45.5mm Length, 42mm Width Case, dial, movement and buckle signed
Condition Report Sign up or Log in Manufacturer : Omega Year : Circa 1970 Reference No : ST 145.014 Movement No : 0'001'697 Model Name : Speedmaster Alaska I Material : Stainless steel Calibre : Manual, cal. 861, 17 jewels Bracelet/Strap : Leather Clasp/Buckle : Stainless steel Omega pin buckle Dimensions : 45.5mm Length, 42mm Width Signed : Case, dial, movement and buckle signed Accessories : Accompanied by Omega Extract from the Archives confirming production of the present watch in Circa 1970 as part of the third and last batch of the "Alaska I" project series of prototypes, and its subsequent delivery to the Apollo Program Office at NASA (Houston). Catalogue Essay In 1968, NASA engineer James Ragan approached Omega with the idea of creating a dedicated “Lunar Surface Chronograph”. Mr. Ragan was the same engineer who oversaw the 1965 tests which selected the Speedmaster as NASA’s official timepiece, and he was therefore very well acquainted with the model. Still, he was worried that the longer EVAs (“Extra Vehicular Activities”) on the lunar surface might prove excessive even for the qualified Speedmaster. This was the beginning of the “ALASKA” project, so named following the internal tradition of code-naming watch developments with the names of cities, countries or states. Contrary to widespread urban legends, this name had indeed absolutely nothing with the low temperatures encountered in the State of Alaska. Many iterations of “ALASKA” projects came to be, but the present lot is a representative of the legendary “ALASKA I” project. Produced in 1969 and delivered to Mr. Ragan at NASA for testing, “ALASKA I” was a series of prototypes involving not only one of the first, if not the first, titanium-cased chronographs, but also a version of Omega ́s calibre 861 that featured numerous modifications to ensure better resistance to extreme temperature changes. Such a technologically advanced project accumulated extremely high costs, and the first iteration of the “ALASKA I” became unbearably expensive. Omega thus created a follow-up design in order to achieve the same results but while trying to keep the costs within reasonable levels. The case of this project was modeled after the then new Speedmaster “Mark II”, but this is where all similarities between the two models end: other than the case, literally nothing remained the same between this second series of “ALASKA I” prototypes and the Speedmaster “Mark II”. While the first series of “ALASKA I" features a black dial, a silvery-white dial was now chosen for its reflective capabilities. The chronograph sub-dial hands were maintained unaltered: the shape of these hands ensures legibility even while the watch sustains extreme vibrations, while any other regular hand under the same conditions would literarily blur out of sight. As with the very first version, the caliber 861 of this second “ALASKA I” version received many technical fine-tuning including the pioneering use of novel lubricants that ensured perfect operation even under extreme conditions in space. Another noteworthy detail is the crystal: during the 1965 tests, Mr. Ragan was very clear that he only accepted acrylic, plexi or hesalite crystals that would not shatter in many small pieces. In order to be able to provide better environmental sealing, Omega reverted to mineral crystal for all variants of the “ALASKA I” project, a fact at first regarded with adequate suspicion by Mr. Ragan himself. After several tests, however, the new crystal was proven more than adequate, with Mr. Ragan later recalling humorously that, try as he might, he could not get the crystals to break. With the approaching of Apollo 11 and the moon landing, the project was eventually cut short thus restricting production to few precious prototypes. This watch is an incredible chance for collectors of rare and highly important timepieces alike to acquire a true piece of history: one of the very few - possibly the only - surviving examples of “Mark
Try LotSearch and its premium features for 7 days - without any costs!
Be notified automatically about new items in upcoming auctions.
Create an alert